NablaBox

One box, four boards
NablaBox connects up to four devices under test (DUTs) and gives your team full control over them: power, serial console and network, from the browser or from your scripts.
- 4 independent DUT slots: power, console and network each
- 5 / 12 / 24 V per slot, switched by software
- Serial console in the browser
- Isolated DUT network: 4× Gigabit Ethernet, 1× uplink
- Web UI, REST API, CLI tools and an MCP server for AI agents
Built for embedded Linux teams
Shared hardware needs clear rules and good tools. NablaBox brings both.
Remote access, zero firewall tickets
NablaBox dials out over a NetBird mesh VPN. Your team reaches the boards from anywhere, and no inbound port is ever opened at the lab site.
LAVA-ready
Power control and serial console plug straight into LAVA through a ready-made device-type template. Run tbot test cases directly from the web UI.
Scriptable by design
Everything the web UI does is a documented REST API call, plus command-line tools for power, console and GPIOs. CI-friendly from day one.
Built for AI agents
The included MCP server lets an AI coding agent such as Claude Code work on a real board like an engineer: power-cycle it, watch the console, run a test, fix and repeat. An agent wrote our 49 U-Boot and Linux test cases this way.
Security built in
User accounts and roles, per-DUT access rights and a complete audit log of every API request. Agents only reach the DUTs you assign. Updates are atomic A/B updates with SWUpdate.
Open-source inside
NablaBox runs Nablix, an open-source Linux distribution built with the Yocto Project by the same team that builds BSPs and update systems for our customers.

On the bench or in the rack
One compact 1U unit, 327 × 224 mm: on its feet on the developer’s bench, or in a 19″ lab rack with the mounting adapters. Every DUT slot has its own locking M12 power connector, a USB console port, a status LED and a place on the isolated network.
- 24 V DC input, front-panel power switch
- 1× USB 3.0 for GPIO boards and accessories